Industrial HDMI Encoder −40°C to +85°C
The Onvon industrial HDMI encoder converts HDMI video into an H.264 IP video stream for transmission over 100BASE-TX Ethernet. It is designed for industrial, vehicle, embedded and OEM video applications that require reliable operation over a wide temperature range.
With an operating temperature range of −40°C to +85°C, this HDMI video encoder is designed for applications where a standard consumer HDMI encoder may not provide sufficient temperature performance.
The encoder supports H.264 video encoding up to 1080p, including 1280×720 @ 60 fps, and provides RTSP/RTP streaming over Ethernet.
Key Features
- Industrial operating temperature: −40°C to +85°C
- HDMI video input
- H.264 video encoding
- Up to 1920×1080 encoding
- Supports 1280×720 @ 60 fps
- RTSP / RTP IP video streaming
- 100BASE-TX Ethernet
- Low-latency video transmission
- 12V / 24V DC power options
- Compact embedded design
- OEM and ODM customization available
Industrial HDMI Encoder with −40°C to +85°C
The most important difference between this industrial HDMI encoder and a standard consumer HDMI encoder is its wide operating temperature range.
This model is designed to operate from:
−40°C to +85°C
The wide temperature range makes the encoder suitable for equipment installed in environments where temperatures can be significantly below or above normal indoor conditions.
Typical applications include industrial equipment, vehicle systems, outdoor electronic equipment, embedded systems and other applications where temperature reliability is important.
For projects where the HDMI encoder must operate in demanding environmental conditions, the −40°C to +85°C specification can be more important than higher video resolution or additional consumer-oriented features.
HDMI / CVBS to IP Video Encoding
This HDMI to IP encoder receives video from an HDMI source and converts it into an H.264 compressed IP video stream.
Typical system connection:
HDMI Video Source → Industrial HDMI Encoder → 100BASE-TX Ethernet → IP Network → Decoder / Software
The Ethernet output allows the encoder to be integrated into existing IP video networks and embedded video systems.
H.264 Encoding up to 1080p
The encoder supports H.264 video encoding up to 1920×1080.
For applications requiring 720p video, it supports:
1280×720 @ 60 fps
This is particularly suitable for projects where the customer’s required specification is 720p60 but a 1080p-capable encoder provides additional flexibility.
The encoder therefore provides more resolution capability than required by a typical 720p60 application without moving to a higher-end 4K video encoder.
720p60 Industrial Video Encoder
For applications requiring 1280×720 @ 60 Hz HDMI input and H.264 1280×720 @ 60 fps encoding, this industrial HDMI encoder provides the required video performance while maintaining the −40°C to +85°C operating temperature specification.
The 720p60 configuration is suitable for applications where real-time video, industrial temperature performance and cost are more important than 4K resolution.
RTSP / RTP Streaming
The encoded H.264 video can be transmitted through the Ethernet interface using standard IP video streaming protocols.
Supported streaming protocols include:
- RTSP
- UDP
This allows the HDMI video encoder to work with compatible IP video software, network video systems and embedded platforms.
100BASE-TX Ethernet
The industrial HDMI encoder provides a 100BASE-TX Ethernet interface for IP video transmission.
This makes the encoder suitable for integration into:
- Industrial Ethernet networks
- Embedded systems
- Network video equipment
- Industrial computers
- Vehicle video systems
- CMS equipment
- Custom OEM equipment
12V / 24V DC Power
The encoder can be configured for 12V or 24V DC power, making it suitable for different industrial and vehicle power systems.
The required power configuration can be specified when discussing an OEM or volume project.
Industrial vs. Consumer HDMI Encoder
The main reason to select this model instead of a standard consumer HDMI encoder is the wide operating temperature range.
| Feature | Consumer HDMI Encoder | Onvon Industrial HDMI Encoder |
|---|---|---|
| Application | Home / indoor | Industrial / embedded / vehicle |
| Operating temperature | Model dependent | −40°C to +85°C |
| HDMI input | Yes | Yes |
| H.264 encoding | Yes | Yes |
| 720p60 | Model dependent | Yes |
| 1080p capability | Model dependent | Yes |
| RTSP/RTP | Model dependent | Yes |
| Ethernet | Model dependent | 100BASE-TX |
| 12V / 24V DC | Model dependent | Available |
| OEM customization | Limited | Available |
For customers whose main requirement is reliable operation across a wide temperature range, the industrial version provides a more suitable solution than a standard consumer HDMI encoder.
Cost-Optimized Industrial Solution
For volume OEM projects, customers do not always need the highest possible video specification.
If the project requires:
- −40°C to +85°C operation
- HDMI input
- 720p60 video
- H.264 encoding
- RTSP/RTP streaming
- 100BASE-TX Ethernet
- 12V or 24V DC power
the encoder can be evaluated according to the actual application requirements.
Although the encoder supports up to 1080p, customers who only require 720p60 do not need to purchase a 4K encoder simply to obtain industrial-temperature performance.
This provides a practical balance between industrial reliability, video performance and project cost.
Applications
This industrial HDMI encoder is suitable for:
- Industrial HDMI video encoding
- HDMI to IP video conversion
- Industrial video monitoring
- Vehicle video systems
- Automotive electronic equipment
- Embedded video systems
- Industrial computers
- CMS equipment
- Network video systems
- Outdoor electronic equipment
- Machine and equipment monitoring
- OEM video equipment
- Custom IP video systems
OEM and ODM Support
Onvon provides OEM and ODM support for industrial HDMI encoder projects.
Depending on project requirements, we can discuss:
- Operating temperature requirements
- HDMI input configuration
- 720p60 or 1080p encoding
- H.264 encoding parameters
- RTSP/RTP streaming
- 100BASE-TX Ethernet
- 12V / 24V DC power
- Firmware customization
- PCB integration
- Metal enclosure
- OEM labeling
For volume projects, please send us your required video resolution, frame rate, operating temperature, power supply and estimated quantity. We can recommend the appropriate configuration and provide a quotation.
Automotive Application
This industrial HDMI encoder can be considered for vehicle and automotive-related applications. However, automotive qualification and e-Mark certification are not included as standard.
If your project requires automotive qualification, e-Mark, EMC or other vehicle-specific certification, please provide the exact requirements for separate evaluation.
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Type | Industrial HDMI to IP Encoder |
| Video Input | HDMI |
| Video Codec | H.264 |
| Maximum Encoding Resolution | Up to 1920×1080 |
| Supported Application | 1280×720 @ 60 fps |
| Streaming Protocol | RTSP / RTP |
| Ethernet | 100BASE-TX |
| Power Supply | 12V / 24V DC |
| Operating Temperature | −40°C to +85°C |
| Application | Industrial / Embedded / Vehicle / OEM |
FAQ
What is the operating temperature of this industrial HDMI encoder?
The industrial version is designed for an operating temperature range of −40°C to +85°C.
Is this an HDMI to IP encoder?
Yes. It converts HDMI video into an H.264 IP video stream for transmission through Ethernet.
Does it support 720p60?
Yes. The encoder supports 1280×720 @ 60 fps H.264 encoding.
Does it support 1080p?
Yes. The encoder supports video encoding up to 1920×1080, depending on the selected configuration.
Does it support RTSP?
Yes. RTSP streaming is supported.
Does it support RTP?
Yes. RTP streaming is supported according to the selected firmware configuration.
Does it support 100BASE-TX Ethernet?
Yes. The encoder provides a 100BASE-TX Ethernet interface.
Is this an industrial-grade HDMI encoder?
Yes. The key industrial feature is the −40°C to +85°C operating temperature range, making it suitable for applications that require a wider temperature range than typical consumer HDMI encoders.
Can you provide a lower-cost configuration?
Yes. For volume projects, Onvon can evaluate a cost-optimized configuration based on the customer’s actual requirements. If 720p60 is sufficient, there may be no need to use a higher-end 4K encoder.
Can you provide OEM customization?
Yes. OEM and ODM customization can be discussed according to the project requirements and order quantity.
